Today is the Last Day – Don’t Miss It!!

Today is the last day to take advantage of the amazing Stampin’ Up! special on select Designer Series Paper (DSP) collections.  Trust me – You don’t want to miss out on this great sale.

The DSP collections that are included in this special are shown below. Click on any picture, and you’ll go to my on-line store. This is a great time to get beautiful DSP for your card making.

Happy Stamping (with amazing DSP)!!
Laurie



 

NC Demos Blog Hop – Thankful for Autumn Colors

Welcome to the NC Demos October Blog Hop!!!  If you were just visiting Tracie Evans Langley’s site, I’m sure you were as impressed with her project as I was.  She is a very talented stamper.  Thanks for taking time to stop by to see my card for this month.

Our theme for October is to be Thank-Fall!  You’re going to see many amazing projects that have seasonal themes.  I am very Thank-Fall for autumn colors!  They are so vibrant and inviting.  Fall is definitely my favorite season.  Sweatshirts, jeans, football, light sweaters, and beautiful leaves just make me smile.  I am also thankful for friends and family who have Fall birthdays!!  If you get a card that looks like the one pictured below, just pretend to be surprised!

This card has a lot of layers, textures, autumn colors, and leaves.  It was a lot of fun to make.  Here are the main steps and directions.

  • The base is Cherry Cobbler cardstock, cut to 8 1/2″ x 5 1/2″, scored at 4 1/4″ on the 8 1/2″ side.
  • There is a card front piece from the Wood Textures Designer Series Paper (DSP) Stack cut to 4″ x 5 1/4″.  I LOVE this DSP stack.  The wood patterns are absolutely amazing.  If you act by tomorrow, you can get four packs for the price of three.  Check here for more details.
  • Adhere the card front piece to the card base.
  • The main sentiment is the Stylized Birthday stamp.  It is stamped in Cajun Craze onto another piece from the Wood Textures DSP Stack.  This piece is cut to 3″ x 3 3/4″.  You can also stamp a shadow image of “Happy Birthday” in Memento Black Ink.  After you stamp “Happy Birthday”, cut the piece into 1″ x 3 3/4″ pieces, as shown.  The result should look like planks of wood.  Adhere the “planks” to scrap pieces of Wood Texture DSP.  If you look closely in the picture, you’ll see vertical DSP pieces behind the planks.
  • Use the Colorful Seasons stamp set and Memento Black Ink to stamp the large veined leaf onto different pieces of Wood Textures DSP.  Color the leaves with your Watercolor Pencils.  If you want, you can use your Aqua Painter to spread the watercolors.  Be sure to use the absolute least amount of water possible in the Aqua Painter.  Die cut the leaves with the corresponding thinlit from the Seasonal Layers Thinlits.
  • Use some of the scrap Wood Textures DSP to die cut smaller leaves.  The die for the smaller leaf is also from the Seasonal Layers Thinlits.
  • Adhere the leaves to the card front.  Glue dots work very well for this.   Occasionally, put your “plank” piece on top of the leaves that you have adhered to make sure you like the design.
  • When you’re happy with the design, use dimensionals to add the “plank” piece to the front of the card.
  • You can add a few leaves on top of the “plank” piece if you want.
  • Confession – I used leftover gold leaf stickers from a recent Paper Pumpkin kit to add a little bling.  You could just as easily die cut the same filigree leaf shape with a die from the Seasonal Layers Thinlits.  The card would be gorgeous with multiple metal colored leaves!
  • There you have it!  A great birthday card that highlights the season.  I hope you enjoy making the card.

Please continue on to Sue Stapp’s project.  A full list of this month’s NC Demos Blog Hoppers is listed at the end of this post.

The main products I used to make this card are shown below.  If you click on any picture, you’ll go to my on-line store.

Happy stamping!
Laurie

NC Demos October Blog Hoppers:

Tamra Davis

Jo Anne Hewins

Tracie Evans Langley

Laurie Meier <— YOU ARE HERE

Sue Stapp

Frances Wagner



 

Hearts Come Home – Christmas Card

It is almost November!  Isn’t that just crazy?!  And, it’s definitely not too early to start making your Christmas cards.  The card pictured below is one of the designs that my husband, Bruce, and I will be sending to friends and family this year.

The focal point for this card is the amazing tiered winter village scene that is created with the Hometown Greetings Edgelits Dies.  They are fun to work with and were also used in another card that I recently posted.  You can see that post here.

After you get the pieces together for the Hearts Come Home Christmas card, you’ll find that it is a pretty easy card to finish and great for mass production.  It’s perfect to do when you’re watching TV with your family, Skyping with friends, or listening to the radio and crafting.  Here are the main pieces and basic steps for the card:

  • Use Thick Whisper White cardstock to create your card base – 8 1/2″ x 5 1/2″, scored at 4 1/4″ on the 8 1/2″ side.  The Thick Whisper White cardstock will give a sturdy base for this card.
  • Believe it or not, the “snow background” is from one of the patterns in the Delightful Daisy Designer Series Paper (DSP)!!  I think it is just perfect for this card.  Don’t you?  The “snow background” DSP is cut to 4 1/4″ x 3″.
  • The three levels of the winter village scene are cut from Whisper White cardstock.  The effect is even more spectacular in person.  Trust me!
  • To test where I needed to make the die cuts for the card, I started with three pieces of Whisper White cardstock cut to 4 1/4″ x 5 1/2″.  I die cut each piece using a different layer of the winter scene.  There are three dies in the set.  Then, I used my test pieces to determine how much room I needed between each and taped the three die cut pieces together.
  • Next, take another piece of Whisper White cardstock (or a scrap piece of cardstock) cut to 4 1/4″ x 5 1/2″ as your model.  Put the taped pieces on top of your model piece and allow the left side of the model piece to show about 1/2″.  Draw pencil or pen marks on your model to show where each die should be cut.
  • Adhere the DSP piece to the top of your card base, as pictured.
  • Adhere the tallest die cut piece on top of the DSP and card base.  In the picture above, this is the die cut piece with the double trees and snowman.
  • Use Mini Stampin’ Dimensionals to adhere the second die cut piece on top of the first die cut piece, as pictured.  The bottom and sides of this piece will be flush with the card base.  Cut some of the mini dimensionals to make sure you adhere the trees and church steeple.
  • In the bottom right hand corner of the final die cut piece, stamp “All Hearts Come Home for Christmas” using Pool Party ink.  The stamp is from the Hearts Come Home stamp set.
  • Use Mini Stampin’ Dimensionals to adhere the stamped, third die cut piece to the front of the card.
  • And, there you have it!  A gorgeous Christmas card that you will be proud to send this season.  I hope you enjoy making this card!

The main products that I used to make the card are shown below.  If you click on any picture, you’ll go to my on-line store.  Enjoy getting started on your Christmas cards!!

Happy stamping!
Laurie



 

It’s Not Too Late to Order Your November Paper Pumpkin!

You’ve probably that the October Paper Pumpkin Kit was one of the most popular kits in quite a while.  In fact, even the refill kits are completely sold out!!! But, great news for you — It’s not too late for you to subscribe and get the November kit delivered directly to your mailbox.

If you missed the October Paper Pumpkin, here is the video for you to see how fabulous it was:

Now that I have your attention, here is the most important information.  Click here to subscribe to Paper Pumpkin so you don’t miss out on the November kit.  It matches the October kit, but it’s still a surprise.

Looking forward to welcoming you as a Paper Pumpkin subscriber!

Happy stamping,
Laurie



 

Happy Birthday to My Brother!

Earlier this week, my brother celebrated a significant birthday.  Happy Birthday, Dave!  You’ll easily be able to tell which birthday by the card I made him!  Here is the front of the card:

And, here is a picture of the inside of the card:

The Wood Textures Designer Series Paper Stack is the perfect background for the card.  I’ve had a great time using this paper and hope you do as well.  The Large Numbers Framelits allowed me to customize the number for my brother’s birthday.  I die cut the numbers after I stamped the birthday sentiment with the Stylized Birthday stamp.  Then, I die cut three more of each number and made my own cardstock chipboard for each number by gluing the pieces together.

The leaves at the bottom of the card are made from the stamps and dies from the Color Theory Suite.  The leaves were stamped on scraps of Wood Textures DSP.  Their coloring is from Watercolor Pencils and then blending with an Aqua Painter.  Tip:  Use as little water as possible when you blend.

The gold leaf sticker is from the September Paper Pumpkin kit!!! Love that kit.  I also used the large leaf stamp from the same Paper Pumpkin kit to decorate the inside of the card.  Again, I colored the leaves with Watercolor Pencils.

The sentiment and numbers for the inside of the card are from the Number of Years stamp set.  The base for the inside of the card is a piece of Wood Textures DSP.  The final touch is rounded corners.

This style card could easily be changed to fit any occasion!  I hope you use this idea and make it your own.

Below are the main supplies I used to make the card.  Click on any picture, and you’ll go to my on-line store.

Happy stamping,
Laurie